Caddy
Caddy Advanced CR
Caddy Advanced CR
In stock
Couldn't load pickup availability
PROUDLY MADE IN CANADA 🍁
THE NEW GENERATION OF FURNACES
Specially designed for those who want a multi-energy system, the Caddy Advanced CR stands out for its ease of connection to an auxiliary heating source. Equipped with a link card that allows control between the different heating modes, the Caddy Advanced CR furnace offers maximum flexibility and comfort.
DISCOVER SELF-REGULATED COMBUSTION
The self-regulated combustion of the Caddy Advanced CR promises constant heat, while requiring minimal effort on your part; just fill the furnace, adjust the temperature and enjoy the heat for hours! The system automatically adjusts the air supply so that combustion is optimized and synchronized with the thermostatic demand.
- At start-up, the furnace injects additional combustion air for easy and quick ignition.
- As the furnace goes into heating mode, it automatically adjusts the combustion air supply and the operation of the convection blower. When your home’s desired temperature is reached (thermostat setting), the furnace goes into energy saving mode, automatically reducing the combustion air and speed of the convection blower.
- At the end of the combustion cycle, if the furnace needs to go back to heating mode (thermostat setting), additional combustion air is injected again to activate the combustion of the embers thus providing a hotter burn on the end of the combustion cycle.
EASE OF USE
Use the Caddy Advanced CR with confidence thanks to its intuitive operation and illustrated quick user guide. Equipped with a glass door allowing you to easily monitor the state of combustion, the furnace optimizes its combustion cycle: you will spend much less time taking care of it vs a conventional furnace (loading wood, adjusting the air, etc.). This optimization also ensures you substantial savings in firewood as well as increased comfort thanks to the production of constant heat throughout the combustion cycle.
To make maintenance even easier with your Caddy Advanced CR, it is equipped with a self-diagnostic feature. A prolonged press on the main button triggers a series of standard tests to quickly identify any malfunction in a furnace component: air intake motor, thermocouple, air distribution motor, etc. If an anomaly is detected, light signals indicate the source of the problem. This feature significantly speeds up diagnosis, allowing a technician to assist you more quickly and reducing downtime for your furnace.
UNMATCHED PERFORMANCE
Among the most efficient furnaces in terms of energy distribution, the Caddy Advanced CR has one of the lowest minimum burn rates in the industry. This means a load of wood burns longer, and therefore reduces the frequency of wood loading. Emissions on this unit are amongst the cleanest of the few EPA 2020 certified furnaces, and yet the Caddy Advanced CR is among the most energy efficient on the market. In addition, the new ECM motor blower option consumes 40% less electricity (and much quieter) than a standard PSC motor blower.
QUICK AND FLEXIBLE INSTALLATION
The Caddy Advanced CR is equipped with pre-wired electrical components that allow for simplified and intuitive connection. For added flexibility, it is possible to install the blower box to the right, left or behind the furnace to optimize its footprint. It is also possible to install the filter supports to the right, left and on top of the blower box to adapt the layout of the ventilation ducts to your installation requirements.
The Caddy Advanced CR includes a tool set and wall support, an ash lip, a thermostat, a moisture reader, a barometric damper and a fresh air intake adapter.
ALTERNATE SOURCE OF HEAT
Always have an alternate source of heat to ensure the comfort and safety of your family. The Caddy Advanced CR comes in multiple possible configurations: wood, wood+electric, wood+gas, wood+electric+heat pump, wood+gas+heat pump and add-on.
When installed as an add-on furnace, only a series configuration is approved for Canada. In the United States, both series and parallel configuration are permitted.
Wood
This furnace can be installed as a wood-only unit. Blower box with regular or ECM motor is required for this configuration.
Combined Wood + Electric
This furnace can be installed as a wood+electric combo unit to ensure your central heating keeps running even when you’re not there to add more firewood. Electric element required for this configuration.
Wood Add-on
If you’ve already got an oil, gas, or electric central heating system but want to add the flexibility of wood, the Caddy Advanced CR wood add-on furnace is for you. This unit, which installs on either side of your existing system, uses the same controls and blower as your existing furnace, giving you a fully compatible wood+gas, or wood+electric combo system.
Combined Wood + Gas
This furnace can be installed as a wood+gas combo unit to ensure your central heating keeps running even when you’re not there to add more firewood. Installed as an add-on with a gas furnace (independent unit), but fully integrated into the Caddy Advanced CR system. The blower box and control unit for optional add-ons are required for this configuration.
Combined Wood + Gas + Heat pump
This furnace can be installed as a wood+gas+heat pump combo unit to ensure your central heating keeps running even when you’re not there to add more firewood. Installed as an add-on with a gas furnace (independent unit), but fully integrated into the Caddy Advanced CR system. The blower box and control unit for optional add-ons are required for this configuration.
Combined Wood + Electric + Heat pump
This furnace can be installed as a wood+electric+heat pump combo unit to ensure your central heating keeps running even when you’re not there to add more firewood. The blower box, electric element and control unit for optional add-ons are required for this configuration.
Specs
Fuel type | Dry cordwood (16" recommended) | |
Recommended heating area-ft² | 1,000 - 2,500 | |
Overall firebox volume-ft³ | 3.6 | |
Maximum burn time | 10 h | |
Maximum input capacity (dry cordwood) | 310,000 BTU | |
Overall heat output rate < | 19,354 BTU/h (5.6 kW) to 47,052 BTU/h (13.8 kW) | |
Average overall efficiency (min. to max.) | 76.6 % (HHV) | 82 % (LHV) |
Delivered heat output rate (min. to max.) | 13,297 BTU/h (3.9 kW) to 42,234 BTU/h (12.4 kW) | |
Average delivered efficiency (min. to max.) | 60.7 % (HHV) | 65 % (LHV) |
Optimum efficiency | 83.2 % | |
Optimum heat transfer efficiency | 81 % | |
Average particulate emissions rate | 0.095 lb/mmBTU (0.041 g/MJ) | |
Average CO | 8.78 lb/mmBTU (3.78 g/MJ) | |
Average electrical power consumption | 330 W | 220 W |
Share


